Typical uses of the Milliamp Clamp CmA-360B:

• Measure mA current for 2-wire irrigation
• Voltage and resistance measurements for irrigation/ landscape lighting wiring systems
• Current measurements for pumps, lighting systems, etc.

CMA-360B Milliamp Clamp Meter Features:

• True RMS response for AC voltage and current ranges for best accuracy with both smooth and noisy or distorted waveforms
• AC Current Measurement
  o 60A max range, ideal for all domestic and light industrial use
  o 6000 mA (6 A) range, ideal for lighter loads such as lighting
• AC Milliamp Current Measurement (leakage)
  o 6.000mA range has 0.001mA, 1μA resolution. 60.00 and 600.0mA ranges are also available. These are excellent for checking for leakage or diagnosing outdoor lighting and irrigation circuit troubles.
• Check for “Nuisance Tipping” (GFCI/RCD) or in irrigation systems to check digital decoders of landscape lighting or feedback signals in industrial control.
• Selectable Low Pass Filter to eliminate high-frequency components (>160 Hz) from measurements.
• 0.001 mA (1 μA) current resolution
• Auto Power Off
• Peak hold function can be left monitoring until trip occurs.
• Manual hold button allows the reading to be “held” perhaps where the display cannot be read due to orientation.
• Jaw opens to 23 mm, ideal for most domestic and light industrial cables.
• Zero button allows nulling out any “stray” field from nearby – our specially designed clamp does that better than most other clamp meters.
• Clamp Meter Supplementary Functions
  o Voltage AC and DC from 600.0 mV to 600.0V
  o Resistance to 600.0 to 600.00 k-ohms
  o Continuity test < 45 ohms
• Milliamp Meter Display backlight
• Overvoltage protected to CAT-IV 300V and CAT-III 600V.
• Supplied with a pair of test leads with removable arc-flash guards, an instruction manual, a carry case and 2 x AAA cells